TM 11-5895-1104-20 P
g. Unit of Measure (U/M). Indicates the standard of the
H - The lowest maintenance level capable of complete
basic quantity of the listed item as used in performing
repair of the support item is the general support
the actual maintenance function. This measure is
expressed by a two-character alphabetical abbreviation
D - The lowest maintenance level capable of complete
(e.g., ea, in, pr, etc). When the unit of measure differs
repair of the support item is the depot level.
from the unit of issue, the lowest unit of issue that will
L - Repair restricted to designated specialized repair
satisfy the required units of measure will be
Z - Nonreparable. No repair is authorized.
h. Quantity Incorporated in Unit. Indicates the quantity
(3) Recoverability code. Recoverability codes are
of the item used in the breakout shown on the illustration
assigned to support items to indicate the disposition
figure, which is prepared for a functional group,
action on unserviceable items. The recoverability code
subfunctional group, or an assembly.
is entered in the fifth position of the Uniform SMR
Code format as follows:
4. Special Information
a Usable on codes are shown in the description
column. Uncoded items are applicable to all models.
Z- Nonreparable item.
Identification of the usable on codes used in this
condemn and dispose at the level indicated in
O- Reparable item. When uneconomically reparable,
condemn and dispose at organizational level.
F- Reparable item. When uneconomically reparable,
condemn and dispose at the direct support level.
H - Reparable item. When uneconomically reparable,
b. The illustrations in this manual are identical to
condemn and dispose at the general support level.
those published in TM 11-5895-1104-34P. Only those
D - Reparable item. When beyond lower level repair
parts assigned the third position SMR maintenance code
capability, return to depot. Condemnation and
"C" or "O" are listed in the tabular listing; therefore, there
disposal not authorized below depot level.
may be a break in the item number sequence. Only
c. National Stock Number. Indicates the National
illustrations containing organizational authorized items
stock number assigned to the item and will be used for
appear in this manual.
c. The following publications pertain to the AN/
d Federal Supply Code for Manufacturer (FSCM).
MSC-64(V)1, 2, 3 and its components:
The FSCM is a 5-digit numeric code listed in SB 708-
TM 5-4120-243-24P, Air Conditioner, Horizontal
41/42 which is used to identify the manufacturer,
Compact; 18,000 BTU (Trane Models) 208 V, 3 Phase,
distributor, or Government agency, etc.
50/60 HZ (Model MAC6H1 8-208-1201-02) 208 V, 3
e. Part Number. Indicates the primary number
Phase, 400 HZ (Model MAC4H18-108-1201-03) 208 V,
used by the manufacturer (individual, company, firm,
1 Phase, 50/60 HZ (Model MAC64H18-230-1201-01);
corporation, or Government activity), which controls
(Harvey W. Hottel Models), 208 V, 3 Phase, 50/60 HZ
the design and characteristics of the item by means of
(Model CH20-6-08) 208 V, 3 Phase, 400 HZ (Model
its engineering drawings, specifications, standards,
CH20-4-08) Phase, 50/6 HZ and (KECO Model F18H-4)
and inspection requirements to identify an item or
208 V, 3 Phase, 400 HZ TM 11-5410-213-14P, Shelters,
range of items.
Electrical Equipment S- 280A/G and S-280B/G TM 11-
5805-201-20P, Telephone Set TA-312/P TM 11-5830-
When a stock numbered item is
340-12, Intercommunication Set AN/ VIC- 1(V) Controls,
requisitioned, the repair part received
Intercommunication Set, C-10456/VRC, C-10680/VRC
may have a different part number than
and Amplifier, Audio Frequency AM- 7046/VRC TM 11-
the part being replaced.
5895-1107-24P, Input/Output Unit MX-10159/G (To be
f Description. Indicates the Federal item name
published.) TM 11-5895-1108-24P, Modem, Digital Data
and, if required, a minimum description to identify
MD-1094/G, Control Modem Digital Data C-10812/G (To