Pull on the two handles to extend the PA from
Handle the waveguides below with
g. On the rear of the PA, remove two cables from
care. If damaged, they may cause
connectors J3 and J4 and the ground wire from terminal
c. On the power amplifier (PA), unlock the quick
disconnect clamp which secures the PA SHF OUT
Because of the bulk and weight of the
waveguide flange to the shelter waveguide flange and
PA, two persons are required to
free the mated flanges.
d. On the front panel, remove the cables from the
remove it. Dropping the PA could
SHF IN and SHF TEST OUT connectors.
cause injury to personnel or damage
e. Loosen the eight captive screws on the front
to the equipment.
panel of the PA.