TM 11-5895-846-14
field operating conditions. This time includes preparation
ed in the tools and equipment column of the MAC. The
time, troubleshooting time, and quality assurance/quality
numbers indicate the applicable tool or test equipment
control time in addition to the time required to perform
for the maintenance functions.
b. Maintenance Category.
The codes in this
the specific tasks identified for the maintenance
functions authorized in the maintenance allocation chart.
column indicate the maintenance category allocated the
Subcolumns of column 4 are as follows:
tool or test equipment.
c. Nomenclature. This column lists the noun name
C - Operator/Crew
O - Organizational
and nomenclature of the tools and test equipment
F - Direct Support
required to perform the maintenance functions.
H - General Support
d. National/NATO Stock Number. This column lists
D - Depot
the National/NATO stock number of the specific tool or
e. Column 5, Tools and Equipment. Column 5
test equipment.
specifies by code, those common tool sets (not individual
e. Tool Number.
This column lists the
tools) and special tools, test, and support equipment
manufacturer's part number of the tool followed by the
required to perform the designated function.
Federal Supply Code for manufacturers (5-digit) in
f. Column 6, Remarks. Column 6 contains an
parentheses.
alphabetic code which leads to the remark in section IV,
Remarks, which is pertinent to the item opposite the
B-5.
particular code.
a. Reference Code.
This code refers to the
B-4.
Tool or Test Equipment Requirements (Sect.
b. Remarks. This column provides the required
explanatory information necessary to clarify items
a. Tool or Test Equipment Reference Code. The
numbers in this column coincide with the numbers us-
(Next printed page is B-3)
B-2