TM 11-5895-846-14
CHAPTER 7
DIRECT SUPPORT MAINTENANCE INSTRUCTIONS
Section I. GENERAL
7-1. Scope
The items requiring direct support maintenance and
covered in this manual are listed in table 7-1. Many of
the items of the terminal are covered in separate TMs.
Section II. TOOLS AND TEST EQUIPMENT
7-3. Test Equipment.
7-2. Tools
The test equipment required
for
direct
support
The tools required for direct support maintenance are
Table 7-1. Items to be Maintained at Direct Support
Maintenance
Item
action req'd
Ref to
Shelter
Removal
and
replacement
Voltage
and
Power Pallet
Troubleshooting
Removal
and
replacement
Section III. MAINTENANCE OF WIRED SHELTER
7-4. Scope
Maintenance of the wired shelter focuses on the power
distribution panel (PDP), EMI filter, and power entry
1-5) and is
limited to
removal and
replacement of components found to be defective during
performance of the fault isolation procedures (below).
See figure 7-1 for location of components. See figure
FO-6 for the PDP schematic wiring diagram.
7-1